Aluminium Lean To Greenhouse 310 - Polycarbonate, Silver or Green Finish

Not your postcode?
Setting the first half of your postcode shows you the full choice in your area.
In a moment you may be asked to share your location. Please allow this so that we can show you the full choice in your area (inclusive of delivery charges). You may also set your location manually using the button above.

Click this messge to hide it.
Aluminium Lean To Greenhouse 310 - Polycarbonate, Silver or Green Finish
1
2
3
4
5
6
Play Video
Pictures 1, 2 and 3 show the green lean to greenhouse. Picture 4 shows the silver lean to greenhouse. Pictures 5 and 6 show the optional green shelving.

Summary:

This 2'x6' lean to greenhouse features twin wall polycarbonate safety glazing and aluminium frames in a choice of anodised silver finish or powder coated green finish. The unique glazing system ensures that the polycarbonate panels are held in place within continuous metal grooves along the edges. As a result, when the frame is fully assembled the glazing panels are more securely fixed and do not come out so easily. Unlike other glazing systems no fixings, clips or capping strips are required. This gives a much more flush, clean looking finish. A free roof vent provides ventilation and a sliding door provides access. The rear height is 6'3". Fitting instructions are supplied for DIY self assembly. Integral shelving is available as an optional extra.

Back to the Top
  • Twin wall polycarbonate glazing
  • Strong aluminium greenhouse frame
  • Clip free glazing system which holds the polycarbonate glazing in position more securely
  • Single sliding door
  • Low threshold doorway
  • 1 free roof vent included
  • Ridge height 6'3" (1910mm)
  • Eaves height 5'2" (1570mm)
  • Length 6'2" (1870mm)
  • Width 2'1" (645mm)

TWIN WALL POLYCARBONATE: Twin wall polycarbonate is virtually unbreakable and very practical. With small children or pets around polycarbonate greenhouses are safer. Polycarbonate is also safer to handle during installation. Polycarbonate greenhouses provide a similar growing environment to glass greenhouses with better insulation properties and reduced glare. Polycarbonate also provides good insulation from frost and maintains a more even temperature for better plant growth. Twin wall polycarbonate also diffuses light to prevent scorching. Twin wall polycarbonate glazing is stronger than the flimsy single skin polycarbonate sheeting supplied with some greenhouses.

GREENHOUSE LOCATION: Ideally your greenhouse should have a clear space at least 18" wide on all sides, if possible. This ensures easy access for both installation and future maintenance. In reality this is often not practical and at many sites it is not needed. A reduced clearance is often possible on one or two sides. You should cut back or remove any nearby shrubs and trees. Remember to allow for future growth. The best position for a lean to greenhouse is against a south facing wall and outside the shadow of nearby buildings and trees. A sheltered position is best otherwise additional screening may be advisable. Polycarbonate glazing is not recommended at exposed sites. Plants need plenty of water so your greenhouse should be close to a water supply and the site should be well drained.

LENGTH AND WIDTH: Sizes are sometimes rounded to the nearest nominal size for ease of reading but the correct external wall sizes are listed alongside the price. The first dimension listed is the width and the second dimension is the length. The width refers to the sloping walls to each side. The length refers to the front wall. The sizes listed are the external wall sizes. These sizes do not include the roof overhang. Many other suppliers quote the overall roof size which is much larger. All sizes are approximate.

Back to the Top
In stock now - log cabins, metal sheds, greenhouses, gazebos, garden furniture