Portable Shed 185 - Steel Frame, Triple Layer Cover

• Available in a choice of sizes
• 35mm diameter steel frame with a rust resistant powder coated finish
• Steel stabilisers improve the structural integrity of the shed
• Durable heat sealed triple layer woven polyethylene cover for maximum water resistance
• UV treated inside and outside
• The cover is secured using ratchet straps which are tensioned to ensure a snug fit between the cover and the frame
• Door panel supplied with zip to both sides
• Can be easily secured to the ground with the 4 ground anchors included as standard. For best results we recommend additional anchors.
• Zips and fastening elastics for rolling up included
• Foundations not required

6'x6' Portable Shed

• Ridge height approximately 5'11" (1800mm)
• Width approximately 5'11" (1800mm)
• Length approximately 5'11" (1800mm)
• Door opening height approximately 4'3" (1300mm)
• Door opening width approximately 4'11" (1500mm)

8'x8' Portable Shed

• Ridge height approximately 7'10" (2400mm)
• Width approximately 7'10" (2400mm)
• Length approximately 7'10" (2400mm)
• Door opening height approximately 5'11" (1800mm)
• Door opening width at top approximately 5'3" (1600mm)
• Door opening width at base approximately 6'7" (2000mm)

10'x10' Portable Shed

• Ridge height approximately 7'10" (2400mm)
• Width approximately 9'11" (3000mm)
• Length approximately 9'11" (3000mm)
• Door opening height approximately 6'3" (1900mm)
• Door opening width at top approximately 6'7" (2000mm)
• Door opening width at base approximately 8'6" (2600mm)

SIZES - LENGTH AND WIDTH: Sizes are sometimes rounded to the nearest nominal size for ease of reading but the correct external wall sizes are listed alongside the price. The first dimension listed is the width and the second dimension is the length. The width refers to the angled gable walls at the front and rear including the door wall. The length refers to the side walls. All sizes are approximate.

• Additional anchoring kits
• Workbenches
• Heavy duty storage tubs

ANCHORING KITS: Additional base anchors provide useful extra protection for your new building. They can be used on any soft surface such as grass, soil or gravel. Each anchor consists of heavy gauge wrapped solid steel wire with an anchoring point at one end and a strong loop at the other end. A steel driving rod is included in the kit to help push the anchors firmly into the ground. If you purchase four anchors they should be placed at the corners of your new building. Any additional anchors purchased should ideally be evenly spaced to give the best performance. Particularly with larger buildings, extra anchoring packs are encouraged.