Click this messge to hide it.
- Hot dip galvanized steel framing
- Hot dip galvanized steel cladding panels with a tough epoxy resin coating inside and out
- Attractive grey colour to external cladding
- Contrasting colour to gable fascias and door frame trims
- Pale colour to all internal cladding
- Sliding padbolt to suit most padlocks (padlock not supplied)
- Vertical, horizontal and diagonal door framing
- Single hinged door approximately 2'8" wide x 5'7" high (820x1710mm) in the 3' wide sloping end wall as pictured (with the high side of the roof to the left, as viewed from outside). It is not possible to reverse the design.
- Cladding sheets are corrugated and ribbed for extra strength
- Corner cladding sheets are folded ninety degrees and overlapped to provide a strong and waterproof corner joint
- Door threshold
- Foundation rails
- Corner brackets
- Louvred ventilators are fitted to the front and rear gables for improved ventilation
- External roof size approximately 3'5" wide x 6'1" deep (1030mm x 1850mm)
- External cladding size approximately 3'3" wide x 5'8" deep (980mm x 1720mm)
- Eaves height approximately 5'9" (1740mm)
- Ridge height approximately 6'3" (1900mm)
- Overall weight 35kg excluding floor - heavier than similar metal sheds supplied by others
- This shed is easy to deliver if access is restricted - all sections are designed to pass through a normal single door
GALVANIZED STEEL CLADDING: These great value buildings are made with galvanized steel throughout. All framing and cladding is hot dip galvanized steel. This is a process by which steel is coated with zinc to protect it from corrosion. The cladding is subsequently coated with epoxy resin, partly to protect the zinc coating itself and partly to add colour. The factory finish is described as primer although a top coat is not normally needed. The combination of a zinc coating with epoxy resin provides durable protection even if the surface is scratched.
STRONG FRAMING: In common with all other steel buildings, including even the largest sports stadia, retail superstores and warehouses, steel cladding sheets are surprisingly thin. The strength of steel buildings is provided by the frame, although the corrugations of the cladding sheets do provide a degree of extra strength. These metal sheds feature strong galvanized steel framing members and the completed frame is rigid.
FREE CORNER BRACKETS: Corner brackets are recommended for any metal building which is subject to frequent use or sited in an exposed area. The corner brackets strengthen the corners and also make it easier to fix your building down into a solid base. The kit includes 4 galvanized steel corner brackets. Screws are included to fix the brackets into the foundation rails. Screws and nylon plugs are also supplied for fixing into bricks, concrete or paving slabs.
HEAVY PACKS: As a rough and ready rule, the heavier a metal shed is the stronger it is. Our sheds are heavier than most similar metal sheds which is why we publish the weight. The packs are very heavy but surprisingly compact, especially the cladding sheets which are packed tightly together.
SIZES - DEPTH AND WIDTH: The sizes are listed alongside the price. The first dimension listed is the depth and the second dimension is the width. The depth refers to the sloping wall. The sizes listed alongside the prices are the external roof sizes. The external wall sizes may be smaller.