3 Seater Storage Bench 214 - Pressure Treated, Hinged Lid

Not your postcode?
Setting the first half of your postcode shows you the full choice in your area.
In a moment you may be asked to share your location. Please allow this so that we can show you the full choice in your area (inclusive of delivery charges). You may also set your location manually using the button above.

Click this messge to hide it.
3 Seater Storage Bench 214 - Pressure Treated, Hinged Lid
1
2
3
4
5
Play Video
All pictures show the standard bench. Picture 4 shows the hinged seat lid open to provide access to the integral storage area. Picture 5 shows a close up of the lid.

Summary:

This attractive and durable 3 seat garden bench features chunky pressure treated timber for strength and durability. Pressure treatment is a lifetime preservative treatment. A large integral storage area is provided beneath the hinged bench seat panel. This bench is largely supplied as prefabricated panels for easier self assembly. The seat back joints are double dowelled for extra strength. The legs are ex 3"x2" (finished size 68x44mm).

Back to the Top
  • Pressure treated timber throughout (lifetime preservative treatment)
  • Timber sizes are nominal i.e. before machining, unless described as finished size
  • All timber used in the construction of this garden bench originates from sustainable forests in Northern Europe
  • Prefabricated panels for simple assembly
  • The kit includes 7 main components (seat, upper back, 2 sides, front, base, lower back) and 48 screws
  • Lift up hinged seat panel for access to storage area
  • Weather seals
  • Slatted back panel with double dowelled joints
  • Sturdy legs ex 3"x2" (finished size 68x44mm)
  • Sturdy scalloped arms ex 3"x2" (finished size 68x44mm)
  • Substantial slats to seat back ex 3" wide (finished size 68x25mm)
  • Overall bench width 5'5" (1640mm)
  • Overall bench depth 2'0" (610mm)
  • Overall bench height 2'11" (900mm)
  • Bench seat height 1'5" (430mm)
  • Storage area internal width approximately 4'10" (1475mm)
  • Storage area internal depth approximately 1'4" (400mm)
  • Storage area internal height approximately 1'0" (310mm)

PINE: All pine is carefully selected timber from responsibly managed sources in northern Europe. The pine is seasoned and kiln dried to achieve the correct moisture content before it is machined.

PRESSURE TREATED TIMBER: Pressure treatment is a lifetime preservative treatment. The preservative is forced deep into the timber under pressure in a vacuum and penetrates below the surface. All other treatments apply a coat of stain to the surface of the timber only. With pressure impregnated timber, the chemicals are permanently bonded to the cell structure of the wood at a molecular level. Tanalith E is a widely used water based version so pressure treated wood is often described as tanalised. Pressure treated wood is almost colourless except for a slight green tint caused by the copper content in the preservative. No further preservative treatment is ever needed. However, if you want a coloured finish you can paint over pressure treated or tanalised wood with normal wood preservative in any colour.

SAFETY: This product should be placed on a flat, level and hard base. Concrete and paving are ideal. Lawns are often too soft, but may be suitable with care. Children should not be allowed to climb on this product or to play around it without adult supervision. Jumping on this product is not recommended. Adults should sit down without excessive force. During the winter months and periods of adverse weather we recommend covering this product or storing it under cover.

Back to the Top
In stock now - log cabins, metal sheds, greenhouses, gazebos, garden furniture