01603 721590
Delivery postcode is
NR25
Page Generated:
11 Nov, 2019 21:57:33

Aluminium Lean To Greenhouse 167 - Double Door, Polycarbonate Roof

Aluminium Lean To Greenhouse 167 - Double Door, Polycarbonate Roof

Summary:

These incredible value lean to greenhouses are 6'7"x8'7", 6'7"x10'8" or 6'7"x12'8". Features include silver finish aluminium and a choice of door positions. The aluminium frame has been anodised, which helps to keep it looking pristine by slowing down oxidation. Standard features include 6mm twinwall polycarbonate roof glazing, double sliding doors and at least 1 roof vent to provide ventilation. Options include staging, automatic openers and heaters. Detailed fitting instructions are supplied for DIY self assembly. We offer fitting as a low cost option in many areas.

Prices fixed until Wednesday 13th November.

The prices INCLUDE DELIVERY. Unlike others we do not add delivery charges at the checkout. Everything you need for assembly is supplied including instructions, fixings and glazing. Our local INSTALLATION and BASELAYING services are also available in many postcode areas.

SizeSilver FinishSilver Finish with Base PlinthEco-grid base, 150 tonnes per m2, fully pavedEco-paving base, 200 tonnes per m2, fully paved
6'7" x 8'7"
£561
£561
£135£244
6'7" x 10'8"
£623
£623
£156£299
6'7" x 12'8"
£686
£686
£183£354

Specifications

  • Strong silver finish anodised aluminium frame
  • Horticultural glass in the walls
  • 6mm twin wall polycarbonate glazing in the roof
  • Integral gutter with 2 full length downpipes
  • Double sliding doors
  • Door position stays
  • 6'7"x8'7" greenhouse includes 1 free roof vent (maximum quantity possible)
  • 6'7"x10'8" and 6'7"x12'8" greenhouses include 2 free roof vents (maximum quantity possible)
  • Flashing between the wall and the greenhouse is not supplied
  • Eaves height 5'11" (1815mm) including optional base plinth
  • Ridge height 7'8" (2335mm) including optional base plinth
  • Door height 5'9" (1755mm) including optional base plinth
  • Door width 4'0" (1220mm)

ANODISED SILVER FINISH ALUMINIUM: These greenhouses have anodised silver finish aluminium frames. Silver finish is the natural colour of aluminium before it is painted. It is cheaper than painted aluminum but just as strong and durable. Anodisation keeps the greenhouse frame looking clean by reducing the rate that the aluminium oxidises. Unpainted aluminium gradually oxidises, which appears as fine grey powder forms on the surface of the greenhouse. Oxidisation occurs quicker in areas of high pollution or in coastal areas. This is the aluminium's natural self protection and it does not harm the greenhouse.

TIPS IF HEIGHT IS RESTRICTED: At sites where the wall height is restricted it may be possible to excavate the base area in order to reduce the ground level. This is not always practical at every site as it depends on the surfaces. It may also be possible to partially bury the base plinth or cills in the ground. This is best done after the greenhouse has been delivered, so you can use the actual greenhouse components for reference. You can use the cill components to ensure that the door opening is unobstructed, also to ensure that you excavate in exactly the right area. It is normally possible to gain a couple of extra inches (50mm) in this way which effectively reduces the overall ridge height.

HORTICULTURAL GLASS: Horticultural glass is the traditional glass for greenhouse glazing and it remains a cost effective option. Although brittle, glass is also rigid and it strengthens the aluminium frame. Glass is also heavy which helps to resist wind. Unless it is broken glass will not deteriorate unlike plastic alternatives which are easily scratched. Although polycarbonate is stable, styrene and perspex quickly lose their transparency. Horticultural glass is normally supplied in small panes up to 24" x 24". Because of this size limitation the glass panes are overlapped. Horticultural glass also features more minor blemishes and imperfections than other more expensive glass but the affordable price makes it a sensible option for any greenhouse.

TWIN WALL POLYCARBONATE: Twin wall polycarbonate is virtually unbreakable and very practical. With small children or pets around polycarbonate greenhouses are safer. Polycarbonate is also safer to handle during installation. Polycarbonate greenhouses provide a similar growing environment to glass greenhouses with better insulation properties and reduced glare. Polycarbonate also provides good insulation from frost and maintains a more even temperature for better plant growth. Twin wall polycarbonate also diffuses light to prevent scorching. Twin wall polycarbonate glazing is stronger than the flimsy single skin polycarbonate sheeting supplied with some greenhouses.

GREENHOUSE LOCATION: Ideally your greenhouse should have a clear space at least 18" wide on all sides, if possible. This ensures easy access for both installation and future maintenance. In reality this is often not practical and at many sites it is not needed. A reduced clearance is often possible on one or two sides. You should cut back or remove any nearby shrubs and trees. Remember to allow for future growth. The best position for a lean to greenhouse is against a south facing wall and outside the shadow of nearby buildings and trees. A sheltered position is best otherwise additional screening may be advisable. Plants need plenty of water so your greenhouse should be close to a water supply and the site should be well drained.

LENGTH AND WIDTH: The external wall sizes are listed alongside the price. The first dimension listed is the width and the second dimension is the length. The width refers to the sloping walls to each side. The length refers to the front wall. The sizes listed are the external wall sizes. These sizes do not include the roof overhang. Many other suppliers quote the overall roof size which is much larger.

Options

  • Choice of double doors in the long wall or a single door in each gable end wall
  • Galvanised steel base plinth (makes installation easier)
  • Staging
  • Louvred vents
  • Automatic roof vent openers
  • Automatic louvre openers
  • Hanging basket brackets
  • Bubble insulation
  • Automatic watering system
  • Attractive wooden slatted water butts
  • Propagators
  • Electric and gas heaters
  • Thermometers and soil gauges

BASE PLINTH: The base plinth makes installation much easier. It is designed to be a portable and prefabricated foundation beam. The plinth features a flat underside to spread the weight of the greenhouse over a larger area. The base plinth can be placed on any flat and level surface including soil, gravel, decking, concrete or paving slabs. It is best to prepare a perimeter footing of concrete or paving slabs for the base plinth to stand on. However, with care the base plinth can be placed on any surface including soil or gravel provided that the ground is flat and level.

BASE ANCHORS - CORNER PEGS: The base plinth includes corner pegs which are designed to be buried in the ground or set in concrete. This is recommended in less sheltered locations. The pegs are used as angle brackets to fix the corners of the base plinth together but they also extend downwards into the ground. If your greenhouse is sited on an existing patio or paved area you can cut the pegs off at ground level. The offcuts can be used to as brackets to help secure the base plinth into the concrete.

HEATERS: We offer a huge range of heaters so whatever your specific requirements we have a heater to do the job. Our electric heaters require a standard domestic 13 amp electricity supply. Our propane gas heaters require permanent trickle ventilation when in use. As an approximate guide, a 3kw heater will heat a greenhouse up to 8'x12' or provide frost protection only up to 10'x15' in normal site conditions. A 1.5kw heater will normally heat a greenhouse up to 6'x8' or provide frost protection only up to 6'x12'. Internal partitions are often used in large greenhouses to create a smaller warm room which is cheaper and easier to heat.

HEATING REQUIREMENTS: Heating requirements vary for several reasons. Location is one factor with more heating required in Scotland than in southern England and less heating required in a sheltered position. The design is also a factor. For example, dwarf walls improve the insulation and lean to greenhouses absorb warmth from the existing wall. Another factor is the materials used. Polycarbonate greenhouses retain heat better than glass and wooden greenhouses retain heat better than metal greenhouses. We recommend you to buy a bigger heater than you need - you can always turn it down.

BUBBLE INSULATION: Bubble insulation helps to protect plants and reduces winter heating costs. The insulation is attached to the inside of the frame using retaining brackets. The brackets are easily fixed to the greenhouse frame and they hold the insulation securely in place. This product is quick and easy to fit the first time and even quicker subsequently. The pack includes insulation, retaining brackets and instructions.

Delivery

  • Delivery is normally between 2 and 3 weeks after order.
  • Our greenhouse prices include all delivery charges - unlike others we do not add delivery charges during the checkout process.
  • This greenhouse is easy to deliver if access is restricted - all packages are designed to pass through a normal single door.

SPECIALIST DELIVERY SERVICE: These greenhouses are normally delivered by specialist trained staff in dedicated vehicles. The benefits of a specialist delivery service include less damage and helpful drivers who will carry your greenhouse to your chosen storage place. We recommend that glass is stored in a safe place where the driver will stack it neatly for you. The aluminium components arrive in one or two long thin boxes.

Ordering/Payment

  • All greenhouse prices include VAT.

ORDER BY PHONE: You can pay with a debit or credit card. To order phone us on 01603 721590 seven days a week.

ORDER ONLINE: You can pay with a debit or credit card. We also accept password protected online payments using Verified by VISA or Mastercard SecureCode.

METHODS OF PAYMENT: We accept most major credit cards and debit cards including VISA, MasterCard, VISA Delta, VISA Debit, MasterCard Debit, Electron, Solo, Switch, Maestro and UK Maestro. We also accept secure online payments using Verified by VISA or MasterCard SecureCode. We do not accept American Express or Diners Club cards at present.

SCHOOLS, COUNCILS AND BUSINESSES: We supply many schools, local councils and businesses both large and small. The prices and terms are the same so you can order online if you wish. If you want to pay by BACS transfer or company cheque you will need to order by phone.

Installation

  • Low cost installation is available in most areas
  • Low fixed rates
  • Payment on completion

THOUSANDS OF SATISFIED CUSTOMERS: Since we were established in 1981 we have fitted buildings for thousands of customers at unbeatable prices. Our specialist fitters have agreed to fit buildings in your area at low fixed rates in return for regular work. Payment is due on completion. To order online just add your chosen fitting option to your shopping basket before you proceed to the checkout. To order by phone just phone us 7 days a week on 01603 721590.

LOW PRICES FOR BASELAYING AND INSTALLATION: Our unique low cost installation service is available in most areas. To see the prices in your local area just enter the first half of your postcode at the top of every page or CLICK HERE. If available our installation service is offered alongside the building prices. To see the prices just click on the blue "i" symbol next to each fitter.

NO FITTERS IN YOUR AREA? If you cannot see any fitters in your area please phone us for a quotation. If you experience any other problems, for example entering your postcode or finding the fitting prices just contact us. You can phone us on 01603 721590. Lines are open 7 days a week and our expert advisers are always happy to help.

FITTERS & BASELAYERS REQUIRED - REGISTER FREE: Give your business a boost - we can put you in touch with customers in your local area! Register now - its free! We need more fitters and base layers in all areas across England, Scotland and Wales. This free service is so simple - it only takes a few minutes to register. Just phone us on 01603 721590 or CLICK HERE to apply online.

Offers

SPECIAL OFFER . . . FREE BASE PLINTH . . . ONLY UNTIL WEDNESDAY 13th NOVEMBER!

  • We are giving away a free base plinth with every greenhouse!
  • This offer ends on Wednesday 13th November so ORDER NOW to avoid disappointment!

Features and Accessories

GREENHOUSES - Minimum base sizes
Minimum base sizes
GREENHOUSES - Ventilation
Ventilation
GREENHOUSES - Automatic vent openers
Automatic vent openers
GREENHOUSES - Greenhouse base preparation and other information
Greenhouse base preparation and other information
GREENHOUSES - Greenhouse Base - Eco-grid base, 150 tonnes per m2, fully paved
Greenhouse base preparation and other information
GREENHOUSES - Greenhouse Base - Eco-paving base, 200 tonnes per m2, fully paved
Greenhouse base preparation and other information
GREENHOUSES - Hanging basket brackets and plant supports
Hanging basket brackets and plant supports
GREENHOUSES - High level shelving
High level shelving
GREENHOUSES - Slatted staging
Slatted staging
GREENHOUSES - Heavy duty steel 2 tier staging
Heavy duty steel 2 tier staging
GREENHOUSES - Wooden potting tables
Wooden potting tables
GREENHOUSES - Wooden 2 tier staging
Wooden 2 tier staging
GREENHOUSES - Heavy duty wooden 2 tier staging
Heavy duty wooden 2 tier staging
GREENHOUSES - Automatic irrigation
Automatic irrigation
GREENHOUSES - Insulation
Insulation
GREENHOUSES - Thermometers and soil gauges
Thermometers and soil gauges
GREENHOUSES - Electric heaters
Electric heaters
GREENHOUSES - Gas heaters
Gas heaters
GREENHOUSES - Water butts
Water butts